Select “WAVGAT UNO R3”.Īs Port, select “/dev/cu.wchusbserial1410” or similar. You should see new boards under “Tools > Boards”. Then copy the content like this: cp -r ~/Downloads/update/* /Applications/Arduino.app/Contents/Javaįor example, the update/hardware/WAV8F/platform.txt needs to end up in /Applications/Arduino.app/Contents/Java/hardware/WAV8F/platform.txt. You should see a folder that looks roughly like this: updateĪll this content needs to go into the IDE’s installation folder.
However, you can also get the configuration from this obscure.
#I NEED ARDUINO DRIVER FOR MAC ARCHIVE#
I recommend that you use the wavgate-ide-update.zip archive attached to this guide, because the files in there have already been patched (and so you don’t need step 4 below). This is again expected, and will be fixed in the next step.ĭownload the configuration files. However, when you launch a Sketch in the IDE, you will probably encounter the following error message: avrdude: stk500_recv(): programmer is not respondingĪvrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00 Now, you should see the Wavgat in /dev when you connect it: ls -l /dev/*usb*Ĭrw-rw-rw- 1 root wheel 21, 15 Oct 8 23:11 /dev/cu.wchusbserial1410Ĭrw-rw-rw- 1 root wheel 21, 14 Oct 8 23:08 /dev/tty.wchusbserial1410 Check the section “Security and Privacy” in System Preferences for any notices about blocked software. Download it, open, follow the installer steps, and reboot your computer.Īfter rebooting, You might need to unblock the driver. You can get these from adrianmihalko’s GitHub repo.Īs of this writing, you need the CH34x_Install_V1.4.pkg version. Wavgat uses a non-standard USB chip called CH340G. This is expected, and will be fixed in the next step. When you start the IDE, at this step, it will likely not see the Wavgat in the “Ports” menu. The remainder of this post assumes that this is where the IDE is located. You can get them from the original links in the post, or use the versions that I attached here.ĭo not use the Web Editor you need the IDE because we need to manually add configuration for the Wavgat.Īfter unzipping the file, copy it to “Applications”. I’m attaching to this guide a bunch of files that are distributed all over the net. The Arduino is a Wavgat Arduino Uno R3 ( like this).This is a MacBook Pro (Retina, 13-inch, Late 2013).Here is my definitive guide, current as of.
#I NEED ARDUINO DRIVER FOR MAC MAC OS#
Getting an Wavgat Arduino Uno R3 to work on Mac OS was a challenging adventure, mainly because of poor documentation.
0 kommentar(er)
